LightSaverUV Disinfection Trolley
Reduce bacteria and viruses in air and on surfaces, without the need for chemicals
Tablet controlled mobile decontamination unit for disinfection of air and surfaces within rooms to reduce bacteria, viruses and other contamination.
A 10-minute cycle exceeds the UV-C dose levels required for a 99.9999% reduction of SARS-CoV-19 on surfaces based on a 3m radius.
Multiple positioning and cycles may be required to reduce shadow areas depending on the size and layout of the room or area.
There can be no personal exposure to the eyes or skin, so should be operated in unoccupied spaces. Should the motion sensors detect any movement, the run cycle will be stopped.
|UV source||8 x high output UVC tubes|
|Life span||9,000 hours|
|Power requirements||220 – 240 V (50 – 60 Hz)|
|Construction material||Stainless steel 316|
|Dimensions||1,870 mm (H) x 600 mm x 600 mm|
Request information and pricing
Our friendly, experienced team are on hand to help identify the most suitable UV solution for your particular process requirements.
Motion sensor cut out
Full power in two minutes
600 J/m2 in 10 minutes at 3m distance
UV health and safety
All of our UV equipment is supplied with maximum permissible exposure times for the skin and eyes at specified distances from the source.
We also provide PPE, hazard warnings, shielding and guarding, risk management training and where required, on-site measurements and training.
Speak to a member of our team to discuss your equipment and safety requirements.
We are proud to be trusted by some of the World’s top companies, supplying UV equipment, training and consultancy to the likes of:
The following information is applicable to the LightSaverUV Disinfection Trolley manufactured by UV Light Technology Limited.
When comparing to independent research, conducted between Signify and Boston University, we can calculate the exposure time required to achieve a particular kill rate of SARS-CoV-19 by dividing the UV-C dose levels stated in the Press Release from June 16, 2020, by the UV-C irradiance measurements taken at a specified distance from the UV system.
UV-C dose requirements
UV-C dose required to kill 99.9999% of SARS-CoV-19: 220 J/m2
Required run time to exceed 220 J/m2
Run time based on distance from LightSaverUV Disinfection Trolley
Up to 4.5m: 10 minutes
4.5m – 6m: 15 minutes
6.5m: 20 minutes
Please note: Depending on the size and layout of the area to be disinfected, multiple cycles may be required to maximise coverage and reduce shadowing.
Excerpt from Press Release, June 16, 2020 (units converted from mJ/cm2 to J/m2)
Since the start of the SARS CoV-2 pandemic, Dr. Anthony Griffiths, Associate Professor of Microbiology at Boston University School of Medicine and his team have been working on developing tools to support scientific advancement in this field.
During their research, they have treated inoculated material with different doses of UV-C radiation coming from a Signify light source and assessed the inactivation capacity under various conditions. The team applied a dose of 50 J/m2, resulting in a reduction of the SARS-CoV-2 virus of 99%. Based on the data, it was determined that a dose of 220 J/m2 will result in a reduction of 99.9999%.
“Our test results show that above a specific dose of UV-C radiation, viruses were completely inactivated: in a matter of seconds we could no longer detect any virus,” said Dr. Anthony Griffiths. “We’re very excited about these findings and hope that this will accelerate the development of products that can help limit the spread of COVID-19.”