- High UV-A light intensity
- Medium beam spread
- Fan cooled
- Full UV light output after 15 seconds
- Hot re-strike after 5 seconds
Power requirements
- 100 – 230 V AC / 50 – 60 Hz
What’s included
- UV 35W Hand Lamp
- Operating and safety manual
Instruction manual
Our comprehensive operating, maintenance and health and safety manual includes maximum permissible exposure times for unprotected skin and eyes to enable strict compliance with statutory UV light Exposure Limit Values.
OptiMinUV® solution
The UV 35W Hand Lamp can be purchased as an individual product or as part of an OptiMinUV® solution which guarantees effective performance and compliance with Health and Safety Regulations by including:
UV light equipment, spares and accessories
Your UV blacklight solution should provide sufficient UV-A light intensity to reveal bright fluorescent effects in your lighting levels and beam spread to cover the required area.
UV light meter
Monitor UV-A light irradiance levels for process control and assess personal exposure levels.
Health and safety products
UV blocking spectacles, UV hazard warning signs, UV bulb change and mercury spillage kit and our ‘Safety First with UV Light’ publication.
Training course
One day training course designed to help you meet your legal obligations for compliance with UV light personal exposure limits and specific hazard awareness training for employees.
OptiMinUV® is the ‘Gold Standard’ which provides peace of mind that you’ve got performance, risk assessment and control covered, along with the confidence and acceptance of your workforce.
Technical information
UV light spectral output
UV 35W high intensity discharge Xenon (Xe) bulb is used in combination with a black woods glass filter to produce a UV light spectral output within the wavelength range 315 nm – 400 nm.
| UV bulb | Xenon 35 W high intensity discharge (ozone free) |
| UV bulb operating life | Approximately 2,000 hours depending on age, environment, switching and cooling |
| UV filter glass | Black (woods glass) – 140 mm diameter |
| Reflector material | Aluminium – UVL full spectrum grade |
| Reflector size | 135 mm diameter |
| Rating | IP 54 |
| Power supply | 100 – 230 V / 50 – 60 Hz |
Spares and accessories

Spare UV 35W Xenon (Xe) bulb to prevent delays when UV light output falls to unacceptable levels.

For process control and safety assessment. Simple, accurate UV light irradiance measurements in the wavelength range 280 nm – 400 nm.

Warning signs should be used to indicate the presence of artificial UV light which could result in significant personal exposure.

Required in accordance with HSE Guidance Note EH 17 (revised). Includes safety spectacles, gloves, alcowipes and mercury spill kit.
Designed to help you meet your legal obligations for compliance with personal UV light exposure limits and specific hazard awareness training for employees.
The result is peace of mind that you’ve got risk assessment and control covered, along with the confidence and acceptance of your process by the workforce.


